Health & Safety
Health & Safety Legislation/Regulations are constantly changing, all of our courses incorporate up-to-date Legislation and Regulations, relevant to the course you are on. The three main Acts of Legislation and Regulations that apply to all training are listed below:
Health & Safety at Work Act 1974
Employers have duties under the Health and Safety at Work etc. Act 1974 to ensure, so far as is reasonably practicable, that the health and safety of their employees and others who are not their employees when on the company's property.
Management of Health & Safety at Work Regulations 1999
Under the Management of Health and Safety at Work Regulations 1999, where two or more employers share a workplace, even on a temporary basis, they must co-operate with each other to ensure that they both comply with their legal duties. These Regulations also require employers to carry out a risk assessment of the hazards involved and to identify the measures needed to comply with other health and safety legislation.
Provision and Use of Work Equipment Regulations 1998
To comply with the Provision and Use of Work Equipment Regulations 1998, employers must ensure that the work equipment is only used for operations, and under conditions, for which it is suitable. In addition, they must ensure that all operators they employ, both new and existing, are adequately trained and, where necessary, provide for their additional or refresher training.
Abrasive Wheel Safety Training
This training course is designed to train operatives in the safe mounting of abrasive wheels and discs.
CCNSG Operative Training - Passport Scheme
This training course is designed to train operatives to meet the standard and receive the CCNSG Passport Card.
CCNSG Renewal Training - Passport Scheme
This training course is designed to train operatives to meet the standard and receive the CCNSG Passport Card.
CCNSG Supervisor Training - Passport Scheme
This training course is designed to train operatives to meet the standard and receive the CCNSG Passport Card.
Display Screen Equipment Regulations Training
This training course is designed for any person who through their work activity is required to spend a large proportion of their time in front of display screens.
Electrical Maintenance Skills Training
This training course has been developed to enable mechanical maintenance staff to be trained to carry out basic electrical maintenance work.
Electrical to Mechanical Conversion Dual Skilling Training Programme
This training course has been designed for persons with a basic knowledge of mechanical skills to enable them to undertake routine mechanical maintenance work.
Emergency First Aid Training
This training course has been designed for candidates who have been nominated by their employer to carry out emergency First Aid action.
Fire Safety Training (Hazards & Precautions)
This training course is designed to introduce staff to the hazards and precautions related to industrial fires within their places of work.
First Aid - Appointed Person (Incorporating Emergency Training)
This training course has been designed for candidates who have been nominated by their employer to be an appointed person to carry out First Aid duties.
Hazard Awareness and Managenent of Control Training
for Substances Hazardous to Health Regulations
This training course is designed for any person whose job involves working with substances hazardous to health but specifically workers and supervisors who work with common hazardous substances such as oils, solvents or those who are exposed to dusts/fumes/vapours.
Health & Safety Training for Managers and Supervisors
This training course is designed for any person who has responsibilities under the the Construction (Design and Management) Regulations 1994, referred to as CDM, specifically managers, supervisory staff and also those with defined roles relating to the CDM Regulations.
IEE Regulations Training (17th Edition)
This training course is intended for personnel who need to be familiar with the scope and application of the 17th edition regulations.
IOSH Working Safely
Working Safely is a one day course for staff from any sector wishing to gain a recognised certificate and a thorough grounding in the essentials of health and safety.
IOSH Managing Safely
The course is designed to give Managers and Supervisors all the information they require to handle Health & safety in their teams.
Manual Handling & Lifting Training
This training course is designed to give candidates sufficient information, instruction and practice as is necessary to ensure the Health & Safety of workers to carry out Manual Handling tasks.
Mobile/Tower Scaffolding Training
This training course is designed for Operatives and Supervisors involved with erection and use of all types of Pre-Fabricated Tower Scaffold.
Office Safety Training
This training course is custom designed as an introduction for all office staff into current Health and Safety Legislation and contains aspects of Manual Handling, VDU Regulations and Fire Safety Course you can see on this web site.
Personal Protective Equipment Training at Work Regulations
The training course is designed for managers and supervisors who have responsibility for the assessment of risk, that can be suitably reduced by the use of personal protective equipment in the workplace.
Power Press Safety Training
Power presses can cause serious injury, or death, if not correctly maintained and operated in compliance with the regulations. This training course will benefit anyone involved with the installation, commissioning and use of power presses.
Risk Assessment Training
This training course is designed for managers, supervisors and safety specialists to acquire the knowledge and skill to carry out risk assessments in the workplace.
Roof Safety Training
This training course is designed for candidates who are required to work at heights or on roofs in the course of their work
Safety Awareness Training
This training course is designed for any operative of a construction plant before they take there Safety Awareness Test.
Safety Training in Excavations - Trench Support Techniques
C&G Services training course has been designed for candidates who are required to safely excavate and support trenches.
Safety Training System for Operating Near Power Lines
C&G Services training course is designed for candidates who work near Overhead Power Lines
Scaffold Safety Inspection Training
C&G Services training course is for Site Supervisors who are responsible for inspecting and checking scaffolds for safe use and signing certificates and registers in accordance with statutory regulations.
Training in Safe Use of Chainsaws
The type of chainsaw training you will require is dependant on the type of work you are undertaking.
Training in Safe Use of Compressed Air Tools
This training course has been designed for candidates who are required to safely operate compressed air tools
Training in Safe Use of Ladders & Tressels
This training course is designed to provide candidates with the working knowledge and skills needed to use ladders and trestles safely.
Training in Safe Use of Pesticide Hand-Held Applicator (PA6)
This training course is aimed at anybody who uses pesticide products approved for use in agriculture, horticulture (including amenity horticulture) and forestry. Such products are sometimes used outside these industries, e.g. public utilities, green keepers, local government contractors etc.
Candidates must have completed (PA1) prior to commencing this course.
Training in Safe Use of Pesticides (PA1)
Mandatory course prior to any practical training
This theory based training course is aimed at anybody who uses pesticide products approved for use in agriculture, horticulture (including amenity horticulture) and forestry. Such products are sometimes used outside these industries, e.g. public utilities, green keepers, local government contractors etc.
Training in Safe Use of Trailer Mounted Wood Chipper
C&G Services training course is designed to train operatives in the safe use of trailer mounted wood chippers.
Training in Safe Use of Water Jetting Equipment
This training course is designed to train operatives in the safe use of water jetting equipment.
Training in the Safe Removal and Disposal of Asbestos Cement Materials
C&G Services training course is designed to provide the candidate with a good awareness and knowledge in the acceptable safe handling and disposal of asbestos materials.